Gear oil supplier in Chennai
Velmayam Industries supplies industrial gear oil and automotive gear oil to factories, plants and fleets in Chennai and across Tamil Nadu. Industrial gear oil is graded by ISO number, such as 220 or 320, and vehicle gear oil by SAE number, such as 80W90. Send the gearbox nameplate, the manual page or the old drum label, and the matching grade is quoted within 24 hours.
Updated

What to send for a rate
The grade
The grade on the gearbox nameplate, the manual page or the old drum label, for example ISO VG 220 or SAE 80W90. A photograph is enough.
The application
An industrial gearbox or reducer, or a vehicle gearbox or axle, with the make and model where the grade is not to hand.
The pack size
Drum or pail, or the pack you buy now.
The quantity
Litres per order or per month, and the delivery pin code.
What moves the rate
- Grade and specification
- The viscosity grade and the performance class on the nameplate or in the manual set the product, and the product sets the rate.
- Industrial or automotive
- An industrial gear oil graded by ISO number and an automotive gear oil graded by SAE number are separate products at separate rates.
- Base oil
- A mineral gear oil and a synthetic gear oil of the same grade are different products at different rates.
- Pack size
- The rate per litre is worked out on the pack size you name, so state it with the grade.
- Quantity
- The quantity per order or per month goes into the rate, and trial quantities are welcome.
ISO 220 and SAE 80W90: two grading systems for two uses
Gear oil carries two kinds of number, and they come from two separate grading systems. Industrial gear oils use the ISO viscosity grades of the standard ISO 3448, where the number is the midpoint kinematic viscosity in square millimetres per second at 40 degrees C. Automotive gear oils use the SAE grades of the standard SAE J306, where 80W is a low temperature grade and 90 is a grade at 100 degrees C.
The two systems measure at different temperatures and count in different ways, so a larger number on one scale does not by itself mean a thicker oil than a smaller number on the other. A viscosity comparison chart shows which bands sit near each other, and it compares viscosity alone. Additives and performance classes differ between an industrial gearbox oil and a vehicle gear oil. So the gearbox nameplate or the vehicle manual decides. Send it and the matching grade is quoted within 24 hours.
| ISO VG 220 or 320 | SAE 80W90 | |
|---|---|---|
| Grading system | ISO 3448, viscosity grades for industrial lubricants | SAE J306, viscosity grades for automotive gear oils |
| What the number is | Midpoint kinematic viscosity in mm²/s at 40 degrees C | 80W is the low temperature grade, 90 is the grade at 100 degrees C |
| Used in | Gearboxes and reducers on plant machinery | Gearboxes and axles of vehicles |
| Where the grade is named | Gearbox nameplate or machine manual | Vehicle manual |
What 220 and 320 mean on an industrial gear oil
On an industrial gear oil, 220 and 320 are ISO viscosity grades, and 320 is the thicker of the two. Each grade allows 10 per cent either side of its midpoint. The number describes viscosity alone and does not rank one oil above another. The gearbox maker chooses the grade, so the nameplate or the old drum label decides. Send it and the matching grade is quoted within 24 hours.
| ISO grade | Midpoint viscosity at 40 degrees C | Permitted range at 40 degrees C |
|---|---|---|
| ISO VG 220 | 220 mm²/s | 198 to 242 mm²/s |
| ISO VG 320 | 320 mm²/s | 288 to 352 mm²/s |
How Velmayam trades
The grade your OEM specifies
Send the machine manual page or the old drum label. We match the specification rather than talk you into a house brand.
Documentation with the drum
Batch certificate, MSDS and where it applies the H1 or ISO 21469 registration, supplied with the consignment.
Proper GST bill and e-way bill
Correct rate, e-way bill raised every time, documentation that does not complicate your input tax credit.
Delivered on the date committed
We quote a date once stock is confirmed, not before. If it is going to slip, you hear it from us first.
Questions buyers ask
How does industrial gear oil 220 compare with 80W90?
Industrial gear oil 220 and 80W90 are graded on two different systems, so the two numbers are not on one scale. ISO VG 220 is an industrial grade with a midpoint kinematic viscosity of 220 square millimetres per second at 40 degrees C, under ISO 3448. 80W90 is an automotive gear oil grade under SAE J306. Additives also differ between the two. The gearbox nameplate or the vehicle manual decides. Send it and the matching grade is quoted within 24 hours.
What is the difference between gear oil 220 and 320?
The difference between gear oil 220 and 320 is viscosity: 320 is the thicker oil. Under ISO 3448, ISO VG 220 has a midpoint kinematic viscosity of 220 square millimetres per second at 40 degrees C, and ISO VG 320 has 320. Neither grade ranks above the other. The gearbox nameplate or the old drum label decides. Send it and the matching grade is quoted within 24 hours.
What is 220 gear oil used for?
220 gear oil is an industrial gear oil of ISO viscosity grade 220, used in the gearboxes and reducers of plant machinery where the gearbox maker names that grade. The number is the midpoint kinematic viscosity at 40 degrees C under ISO 3448, and the letters EP on a label stand for extreme pressure additives. Check the gearbox nameplate or the manual, send a photograph, and the matching oil is quoted within 24 hours.
What is the specification of gear oil 220?
The specification of gear oil 220 starts with its viscosity: ISO VG 220 means a kinematic viscosity between 198 and 242 square millimetres per second at 40 degrees C, under ISO 3448. A performance class sits beside the number, for example CLP, the DIN 51517 class for gear oils with extreme pressure additives. The gearbox nameplate or manual states the full line. Send it and the oil matching that specification is quoted within 24 hours. The batch certificate and MSDS come with the consignment.
What is the price of gear oil 220 per litre?
The price of gear oil 220 per litre depends on the performance class named on the gearbox nameplate, the base oil, the pack size and the quantity. Send a photograph of the nameplate or the old drum label with the pack size and the quantity on WhatsApp to +91 96776 44604, and a quote comes back within 24 hours. A proper GST invoice and e-way bill go with every order.
What is 80W90 gear oil used for, and what does 20 litres cost?
80W90 gear oil is an automotive gear oil, used in the gearboxes and axles of vehicles whose manual names SAE 80W90. In the label, 80W is the low temperature grade and 90 is the grade at 100 degrees C, under SAE J306. The cost of a 20 litre pack depends on the performance class the manual names, such as API GL-4 or GL-5, and on the quantity. Send the vehicle manual line and a quote comes back within 24 hours.
What is the difference between 80W90 and 85W140 gear oil?
The difference between 80W90 and 85W140 gear oil is in both halves of the label. Under SAE J306, 80W and 85W are low temperature grades, and 90 and 140 are grades at 100 degrees C, where 140 is the thicker oil. Neither grade ranks above the other. The vehicle or axle maker's manual names one of them. Send that line or the old drum label, and the matching grade is quoted within 24 hours.
Lines this page covers
- Gear oilGrade or viscosity, pack size
- Automotive gear oilVehicle or grade, pack size
Build a requirement slip from the maintenance oils range
Build a requirement slip from the automotive lubricants range
Company brochurePDF, 1.2 MBRelated pages
Send the item list on WhatsApp
Who you are buying from
Velmayam Industries was incorporated in August 2026. The people running it are not new. Our COO has eight years supplying industrial consumables to manufacturers across Tamil Nadu, including multi-unit textile mills, under a previous business.
Advance payment for first orders; credit terms for approved accounts.
Lead time and minimum order are confirmed with each quote.
- Legal name
- Velmayam Industries Private Limited
- CIN
- U46900TN2026PTC196608
- GSTIN
- 33AAMCV5807D1ZD
- Registered office
- 9A, 1st Main Road, 1st Cross Street
Gopalapuram, Pattabiram, Poonamallee
Tiruvallur 600072, Tamil Nadu - Directors
- Avinash Srinivasan, Patharla Balaji Sushma
- Trading contact
- Suseendran Venkatesan, Chief Operating Officer, +91 72004 64908
- +91 96776 44604
- avinash@velmayam.in