Velmayam Industries

Grease supplier in Chennai

Velmayam Industries supplies high temperature grease, bearing and chassis grease, open gear and chain grease and food grade grease to factories and plants in Chennai and across Tamil Nadu. Grease is chosen by where it goes. Send the application and the old label, and the matching grade is quoted within 24 hours. For a food line, ask for the NSF H1 registration number and it is sent with the quote.

Updated

Illustration of a grease nozzle applying pale grease to the rollers of a large steel roller bearing.

What to send for a rate

  • Where it goes

    Bearing, chain, open gear, high temperature point or food line, and the machine it sits on.

  • The grade

    The grease named in the machine manual, or a photograph of the old label.

  • H1 or not

    Whether the point sits above the product line and needs an NSF H1 registered grease.

  • Pack size and quantity

    The pack you buy now, the kilograms per order or per month, and the delivery pin code.

What moves the rate

Type of grease
The thickener and the base oil named on the old label or in the manual set the product, and the product sets the rate.
Temperature
A grease for a high temperature point is a different product, at a different rate, from a general bearing grease.
Certification
A food grade grease with NSF H1 registration or ISO 21469 certification is quoted as its own product.
Consistency
The NLGI number on the label, which describes how stiff the grease is, is part of the specification.
Pack size
The rate per kg is worked out on the pack size you name.
Quantity
The quantity per order or per month goes into the rate, and trial quantities are welcome.

Choosing grease by where it goes

A grease is a base oil held in a thickener, with additives for the job. One machine can need different greases at different points, so the place the grease goes is the first thing to send. The machine manual or the old label names the grade for each point. Send it and the matching grade is quoted within 24 hours.

Choosing grease by where it goes
Where it goesWhat mattersWhat to send
BearingSpeed, load and temperature at the bearing, and the grade the machine or bearing maker namesManual page or old label, with bearing size and speed if known
ChainA lubricant that reaches the pins and bushes and stays on the chainChain type, speed and temperature
Open gearA grease that clings to the tooth face, as there is no gear case to hold itHow it is applied (brush or spray) and the old label
High temperature pointThe working temperature range on the data sheet, set against the temperature at the pointThe temperature at the point and the old label
Food lineNSF H1 registration, or ISO 21469 certificationWhere the point sits against the product line

Food grade grease: NSF H1 and ISO 21469

On a food line, pasteuriser chains, fillers, conveyors and any bearing above the product line need NSF H1 registered grades. H1 is the registration for lubricants used where incidental contact with food is possible. ISO 21469 is a separate certification that goes further than H1 registration. Ask for the registration number and it is sent with the quote.

How Velmayam trades

  • The grade your OEM specifies

    Send the machine manual page or the old drum label. We match the specification rather than talk you into a house brand.

  • Documentation with the drum

    Batch certificate, MSDS and where it applies the H1 or ISO 21469 registration, supplied with the consignment.

  • Proper GST bill and e-way bill

    Correct rate, e-way bill raised every time, documentation that does not complicate your input tax credit.

  • Delivered on the date committed

    We quote a date once stock is confirmed, not before. If it is going to slip, you hear it from us first.

Questions buyers ask

What is the price of high temperature grease per kg?

The price of high temperature grease per kg depends on the thickener and the base oil, the working temperature range on the data sheet, the pack size and the quantity. Two greases both sold as high temperature can be different products at different rates. Send the temperature at the point, the old label and the quantity on WhatsApp to +91 96776 44604, and a quote comes back within 24 hours.

Which high temperature grease is used for bearings and motor bearings?

The high temperature grease used for bearings and motor bearings is the one named by the machine, motor or bearing maker, on the nameplate or in the manual. Speed, load and the temperature at the bearing decide the grease, and a motor with grease nipples often carries the grease type on its lubrication plate. Send a photograph of the plate, the manual page or the old label, and the matching grade is quoted within 24 hours.

What temperature can a high temperature grease take?

The temperature a high temperature grease can take is the working range printed on that product's data sheet, and the range differs from one grease to the next. High temperature is a trade description, and each product states its own range. The dropping point on a data sheet is the temperature at which the grease turns fluid enough to drip in a test, and the working range sits below it. Send the temperature at the point, and the matching grade is quoted within 24 hours.

Does food grade grease come with a certificate?

Yes, food grade grease comes with its registration: ask for the NSF H1 registration number and it is sent with the quote. The batch certificate and MSDS come with the consignment, with the H1 or ISO 21469 registration where it applies. ISO 21469 is a separate certification that goes further than H1 registration. Tell us where the grease goes on the line, and the registered grade is quoted within 24 hours.

What is the difference between food grade grease and regular grease?

The difference between food grade grease and regular grease is registration for use near food. A food grade grease carries NSF H1 registration, which covers lubricants used where incidental contact with food is possible, and a regular grease carries no such registration. H1 covers incidental contact only: it does not make the grease an ingredient of the food. Pasteuriser chains, fillers, conveyors and any bearing above the product line need NSF H1 registered grades. Ask for the registration number and it is sent with the quote.

How do I choose bearing grease?

Bearing grease is chosen from the grade the machine or bearing maker names, which reflects the speed, the load and the temperature at the bearing. The label carries a thickener type, a base oil and an NLGI number, which describes how stiff the grease is. Send the manual page or the old label, or the bearing size, speed and temperature, and the matching grade is quoted within 24 hours.

What is the difference between bearing grease and chassis grease?

The difference between bearing grease and chassis grease is the duty each one is made for. Bearing grease serves rolling bearings such as wheel bearings, and chassis grease serves slower sliding joints such as pins, bushes and linkages. The automotive grease standard ASTM D4950 keeps the two apart, with G categories for wheel bearings and L categories for chassis, and a grease marked GC-LB meets the highest category of each. Send the vehicle manual line, and the matching grease is quoted within 24 hours.

What is the price of food grade grease per kg, and who supplies it?

The price of food grade grease per kg depends on the registration needed (NSF H1 or ISO 21469), the temperature at the point, the pack size and the quantity. Velmayam Industries supplies food grade grease in Chennai and across Tamil Nadu, for food and beverage plants and any line that needs NSF H1 registered grades. Send those details on WhatsApp to +91 96776 44604, and a quote comes back within 24 hours. Ask for the registration number and it is sent with the quote.

Lines this page covers

  • High temperature greaseApplication, pack size
  • Bearing and chassis greaseApplication, pack size
  • Open gear and chain greaseApplication, pack size
  • Food grade grease and lubricantApplication, H1 needed or not, pack size

Build a requirement slip from the greases range

Company brochurePDF, 1.2 MB

Send the item list on WhatsApp

Who you are buying from

Velmayam Industries was incorporated in August 2026. The people running it are not new. Our COO has eight years supplying industrial consumables to manufacturers across Tamil Nadu, including multi-unit textile mills, under a previous business.

Advance payment for first orders; credit terms for approved accounts.

Lead time and minimum order are confirmed with each quote.

Call +91 72004 64908 WhatsApp +91 96776 44604